BPSC APSWMO Chapter Tests: One Unit at a Time, Through the Whole Official Schedule
š Table of Contents
- BPSC APSWMO Chapter Tests: Key Facts First
- What This Page Covers
- Why One Unit at a Time Works
- Block 1: Solid Waste, Unit by Unit
- Block 2: Liquid Waste, the Long Chain
- Blocks 3 to 5: Hazardous Waste, Rules, and EIA
- Paper-I in Chapters
- The Order to Attack the Units
- How a Chapter Test Is Built
- The Notebook That Grows With the Units
- Close the Doors, One by One
Quick Answer: The chapter tests for BPSC Assistant Public Sanitary and Waste Management Officer follow the official syllabus, Schedule-I, unit by unit. Paper-II, Solid and Liquid Waste Management, is printed in five blocks: solid waste management in four units, liquid waste management in four units, hazardous waste management in three units, the waste management rules and compliances, and environmental impact assessment with clearances. Paper-I, General Studies, is worked in its own chapters of history, geography, polity, economy, science, Bihar and current affairs. A chapter test takes one unit, asks it at the exam's level and speed, and shows you in one sitting whether that unit is truly yours. The exam itself, Advt. No. 108/2025 for 69 posts, was held on 23 April 2026 and cancelled on 1 May 2026, and its new date is awaited, which makes this unit-by-unit season the best use of the wait. Start on the BPSC APSWMO chapter tests page, and keep the official word at bpsc.bihar.gov.in.
BPSC APSWMO Chapter Tests: Key Facts First
A syllabus looks small on one page and huge in the third month. The cure for that feeling is not courage. It is division. The Commission itself has divided your Paper-II for you, into blocks and units, in the official Schedule-I that came with Advt. No. 108/2025. Chapter tests simply take the Commission's own division seriously: one unit at a time, finished fully, before the next one begins.
Here is the map, exactly as printed, because every later page of your preparation hangs on it.
| Point | Fact |
|---|---|
| Exam frame | Advt. No. 108/2025, 69 posts, written exam only. Paper-I General Studies and Paper-II Solid and Liquid Waste Management, 125 questions and 100 marks each, 2 hours each |
| Paper-II source | The official syllabus, Schedule-I, published by BPSC with the advertisement. Paper-II is set at the level of the qualifying degrees |
| Block 1 | Solid Waste Management: Unit I types of solid wastes; Unit II municipal solid waste characteristics; Unit III collection of solid waste; Unit IV processing, treatment and disposal |
| Block 2 | Liquid Waste Management: Unit I introduction; Unit II wastewater; Unit III wastewater treatment; Unit IV water reuse |
| Block 3 | Hazardous Waste Management: Unit I introduction; Unit II biomedical and chemical wastes; Unit III physical and chemical treatments |
| Block 4 | Waste Management Rules, Regulations and its Compliances |
| Block 5 | Environmental Impact Assessment and Environmental Clearances, with site authorization and Consent to Establish and Consent to Operate from the Pollution Control Board of Bihar |
| Paper-I ground | General Studies: current events, and topics of daily observation and experience and their scientific aspects, as the schedule describes it |
| Exam record | Held on 23 April 2026, cancelled on 1 May 2026, no new date yet. The syllabus has not been changed by any later notice |
Count the shape of it. Eleven named units across the first three blocks, and two short blocks that are mostly lists and law. That shape should drive your calendar. The two big blocks are rivers; they take weeks and reward depth. The last two blocks are ponds; they are small, still, and full of easy fish, and candidates lose those marks only by never visiting them.
What This Page Covers
- Key facts first: the official map
- Why one unit at a time works
- Block 1: solid waste, unit by unit
- Block 2: liquid waste, the long chain
- Blocks 3 to 5: hazardous waste, rules, and EIA
- Paper-I in chapters
- The order to attack the units
- How a chapter test is built
- The notebook that grows with the units
- Final words before you start
Why One Unit at a Time Works
A full mock tells you that you are weak in liquid waste. That is a weather report, not a repair. A chapter test tells you that you are weak in Unit III of liquid waste, in the secondary treatment part, where the activated sludge process and the trickling filter live. That is a repair address. You can go there the same evening.
There is a second reason, and it is about how this subject is built. Waste management is a chain subject. Waste is born, it is collected, it is moved, it is treated, it is disposed. Water is used, it is dirtied, it is treated, it is reused. If one link of the chain is weak in your head, every question that crosses that link falls. Chapter tests find the weak link while it is still cheap to fix, in a sitting of one unit, instead of in a full paper where five weak links hide inside one sad total.
And a third reason, the human one. A unit can be finished. You can close Unit I of solid waste in a week and know it is closed, the way you shut a door. Eleven doors shut, one by one, is a feeling no amount of general reading gives. This exam now has a long, dateless wait inside it, and the candidates who survive the wait are the ones with doors shutting behind them, month after month.
Block 1: Solid Waste, Unit by Unit
Unit I is the doorway: types of solid wastes. Municipal solid waste, industrial waste, hazardous waste, bio-medical waste, e-waste. Then the story of the subject itself, how solid waste management grew, waste as a result of life, material flow and waste generation, and the idea of integrated solid waste management, its planning and its operation. This unit is mostly ideas and names, and it rewards a clean, slow first reading. Make your own one-line meaning for each waste type, with one daily example: the kitchen peel, the factory's ash, the hospital's used dressing, the dead phone. The examiner asks types the way life shows them.
Unit II is the nature of city waste: how much waste a city makes, what it is made of, and how that making and mixing is found out. Composition and how composition is decided, particle size, heat value, bulk and material density, the materials that can be recovered, mechanical properties, and how much of the waste can rot. This is the numbers unit of the block. Quantities live here. Chapter tests on this unit will ask you to hold figures and meanings together, and they should. A sanitary officer who cannot say what his city's waste is made of is carrying a title, not a subject.
Unit III is the street: collection of solid waste. Refuse collection systems, commercial waste, transfer stations, collection of recyclable materials, litter and street cleanliness, and the design of a collection system. This is the most worldly unit of the four, the one closest to the job you are applying for. Read it with your own town in mind: its wards, its carts, its dumping ground. When a question describes a collection problem, you should be able to see your own street in it.
Unit IV is the works: processing, treatment and disposal. The living way first, composting and the making of biofertilizers and energy. Then the fire way: incineration, gasification, wet oxidation, pyrolysis, pelletization and energy production. Then the habit way: Reduce, Recycle and Reuse, and kitchen waste management. And at the end, the ground itself: landfills, their classes, types and methods, and design. The unit closes with the present issues of the field, public and private ownership and operation, and the role of the solid waste engineer. This is the biggest unit of the block and the one the 2022 paper's spirit loved most. Give it two weeks, not one, and draw every process once with your own hand. A process you have drawn is a process you own.
Block 2: Liquid Waste, the Long Chain
If solid waste is a set of rooms, liquid waste is a river with works built along it. The four units follow the water.
Unit I is the introduction: waste management as a whole, liquid wastes of the municipal, domestic and industrial kinds, solid wastes beside them, environmental engineering and environmental systems, and the mass-balance way of solving problems, which is the subject's habit of asking what comes in and what goes out. Do not rush this unit because it looks soft. The mass-balance idea returns inside treatment questions like a refrain.
Unit II is wastewater itself: the water resource and why it matters, water as a remarkable substance, and then pollution, its types, sources and effects, on surface water and on ground water. Wastewater in its kinds: domestic black water and grey water, industrial wastewater, agricultural wastewater. This unit builds the why under the whole block. A candidate who knows why each water must be treated will learn the how of the next unit twice as fast.
Unit III is the treatment chain, and it is the heart of Paper-II. Flow sheets first, unit operations and unit processes. Primary treatment and pre-treatment: screening and bar racks, grit removal, comminution, flow equalization. Sedimentation and its design ideas. Then secondary treatment in its two families: the chemical processes, precipitation, coagulation, disinfection; and the biological processes, the nature and growth of the living side, the activated sludge system, trickling filters, and the anaerobic family, CSTR, anaerobic filters, UASB, and oxidation ponds. Then the advanced techniques: membrane filtration, gas stripping, ion exchange, and the Advanced Oxidation Process. Learn this unit as a walk: stand at the inlet of a treatment plant in your mind and walk to the outlet, naming each work as you pass it. Chapter tests on this unit should feel like that walk, gate by gate.
Unit IV is water reuse: reclamation and reuse, the technologies and their flow diagrams, the public health and environment questions inside reuse, reuse in farms and in watering land, groundwater recharge with reclaimed water and its guidelines, risk assessment, and industrial reuse, with cooling tower makeup water as the named case. This unit is small and very askable, because reuse is the word of the time. Do not leave it for the end.
Blocks 3 to 5: Hazardous Waste, Rules, and EIA
Block 3, hazardous waste management, has three units and a darker colour than the first two blocks. Unit I introduces it: what hazardous waste is and how it is classed, why it must be managed, where it comes from, its effects on the community, its terms, and its storage and collection, with the problems of developing countries and the protection of public health and the environment. Unit II covers biomedical and chemical wastes: the types of biomedical waste, its management, handling and control; and chemical wastes from home and industry, inorganic pollutants, their effects on the environment, the need for control, and the treatment and disposal ways, physical, chemical and biological. Unit III is the treatments themselves: filtration and separation, chemical precipitation, solidification and stabilization, chemical oxidation and reduction, pervaporation, ozonation, evaporation, and then the repair of harmed land, containment, in situ bio-treatment, site remediation, phytoremediation and biofiltration. This block rewards exact words. Hazardous, biomedical, stabilization, remediation: the examiner will test whether you keep these brothers apart.
Block 4 is one line in the schedule and a whole habit in the exam: Waste Management Rules, Regulations and its Compliances. There is no unit list under it, which tells you how to read it. The rules are the frame: which rule governs which waste, who must obey, what paper must move with the waste, what happens when it does not. Prepare this block as a table you build yourself, rule on one side, waste and duty on the other, and revise it the way you revise a bus timetable, often and quickly. In the chapter tests this block is short, sharp and scoring.
Block 5 is environmental impact assessment and environmental clearances, closing with site authorization and the Consent to Establish and Consent to Operate from the Pollution Control Board of Bihar. This is the block where the subject meets the office. EIA is the study done before a project is allowed; the consents are the Pollution Control Board's gates, one before you set up, one before you run. Candidates with field or plant experience often find this block easy to feel and hard to phrase; the exam wants the phrases. Learn the order of the gates and who stands at each one.
Now hear the plain truth about these three blocks together. They are shorter than blocks 1 and 2. They are also more exact, more list-like, and therefore cheaper to master fully. In a 125-question paper, the marks hiding in blocks 3, 4 and 5 are the marks a prepared candidate banks early. The chapter tests on this page give each of them its own sitting, so that none of them is left as a rumour in your preparation.
One Unit, Closed Properly: Four Moves
Eleven units in Paper-II, closed one by one, is a syllabus finished. Anything less is a syllabus visited.
Paper-I in Chapters
Paper-I has no printed unit list, and that is exactly why candidates let it sprawl. Give it chapters of your own, the standard BPSC chapters, and close them the same way. History in its three stretches, ancient, medieval and modern, with the freedom movement given its own weight, and Bihar's part in it. Geography of India and of Bihar: rivers, soils, climate, crops, and the map work that makes facts stick. Polity: the Constitution's frame, the rights and duties, Parliament and the state house, the Panchayati Raj that runs your own district. Economy: the budget words, banking, agriculture and industry, and Bihar's economy after independence. General science of daily life, the physics, chemistry and biology that the schedule's own line points to when it speaks of daily observation and its scientific side. And Bihar special: the state's schemes, its honours, its places, its people in the news.
Two of these chapters deserve a special word from this post's candidates. The science chapter is your home ground; a chemistry or engineering graduate should take marks there that others cannot, so do not let rust form on it. And the environment corner of current affairs belongs to you twice over: it feeds Paper-I questions and it feeds your Paper-II understanding of rules and clearances. Read the environment news like an officer, not like a fan.
The chapter tests for Paper-I on this page follow those chapters one at a time, so that your General Studies score stops being weather and becomes a list of closed doors too. Between chapter work, keep the whole-paper habit alive on the full tests page, and keep the old real questions in view on the PYQ page, where the November 2022 Paper-I shows the true spread of these chapters.
The Order to Attack the Units
Students ask where to begin. Begin where the marks are cheapest, and let early wins fund the long campaigns. My order for this syllabus, and the reason under each step, is this.
First, Block 4 and Block 5, the rules and the EIA with clearances. Two short blocks, mostly lists and orders of things. A fortnight closes them, and they will pay you in every test from then on. Second, Block 1, solid waste, the home block of this post, four units from types to landfills. Third, Block 3, hazardous waste, which borrows words from Block 1 and adds its own. Fourth, Block 2, liquid waste, the longest chain, taken slowly with drawings, when your confidence is already standing. Paper-I chapters run beside all of this, one chapter a week, never instead of it.
A boy from Nalanda once told me he had read the liquid waste unit five times and still feared it. He had never drawn it. One evening, one page, one chain of boxes from screening to the oxidation pond, and the fear fell by half. That is the whole secret of this syllabus, if there is one. It is a subject of flows. Read it as flows, test it unit by unit, and it stops being a mountain and becomes a set of roads you have walked.
When a unit's chapter test still hurts after two sittings, do not curse the unit. Split it. The sectional tests on the sectional tests page let you work a whole block at exam speed, and the full mock will tell you a month later whether the repair held at the level of the whole paper.
How a Chapter Test Is Built
A chapter test is not a reading test with marks. It is built the way the examiner builds, only smaller. Inside one unit, questions come in four kinds, and a good chapter test carries all four. First, the meaning questions: what a thing is, what a term holds, which waste belongs to which family. Second, the fact questions: a figure, a step's place in a chain, the name of the gate where a consent is given. Third, the process questions: what comes after grit removal, what a trickling filter does that an oxidation pond does not, why gasification is not incineration. Fourth, the use questions: a small scene from a town or a plant, and you must choose the right step, the right rule, the right treatment. A unit is not yours until all four kinds stop hurting.
The speed is the exam's speed. The real paper gives you about 57 seconds a question, and chapter tests keep that pressure, because a unit known slowly is a unit half known. But the size is kind: a chapter test is one unit's worth of questions, a sitting you can finish after dinner, mark in ten minutes, and repair the same night. That smallness is the point. A full paper takes a day to judge. A chapter test takes an evening to judge and fix, and the fixing is where the marks are.
One more rule of ours, stated plainly. The chapter tests on this page follow the printed Schedule-I line by line, and where the schedule is silent, the test stays silent too. BPSC has printed no unit-wise question split for the real paper, so no chapter here claims to be worth a fixed number of questions in the exam. The tests are training weights, chosen by the size of each unit in the schedule and the weight of the unit in the officer's real work. Train with them honestly, and let the full mock, not a promise, tell you what they built.
The Notebook That Grows With the Units
Keep one notebook for this exam, and let it grow unit by unit beside the chapter tests. Its shape is simple. For each unit, three pages at most: one page of drawings, the chains and flows in your own hand; one page of exact words, the terms and figures the examiner can ask straight; and one page of wounds, the questions you missed in the chapter test, written as lessons, not as scores.
I have watched this notebook change candidates. A girl from Bhagalpur showed me hers in the winter: the liquid waste chain drawn four times, each time cleaner, and the wounds page of the treatment unit shrinking from eleven lines to three. She did not study more hours than her friends. She studied with a memory outside her head, one that did not let a fixed weakness pretend to be fixed. When the exam's date comes, that notebook becomes your revision book, and revision from your own wounds is three times faster than revision from a printed summary, because every line in it is a line you once paid for.
Bring the notebook to the full mocks too. After each full paper, the weak block sends you back to a unit, and the unit sends you back to its three pages. That circle, mock to unit to notebook to mock, is the whole method of this section of pages. It is not fast in the first month. By the third month it is the fastest thing you own.
Close the Doors, One by One
Here is the whole page in one breath. Your Paper-II is printed in five blocks and eleven units, and your Paper-I can be given chapters of the standard BPSC kind. A chapter test takes one unit at the exam's own level and tells you, in one sitting, whether that unit is yours. Eleven units closed, two short blocks banked, and six Paper-I chapters shut: that is what ready looks like for this post, and it can be built quietly, in the wait, without any date to push you.
Start with the rules block this week. It is short, it is scoring, and its chapter test will show you the method at its kindest. Then walk the blocks in order, and keep your notebook honest.
This page is made by Mock Test Center, founded by Shubham Kumar Sah. We make free and easy practice tests for aspirants of Bihar and all of India. Facts on this page are taken from the official BPSC Advt. No. 108/2025 and its official syllabus (Schedule-I), read directly, and the official press release of 1 May 2026. Always read the official notice for the final word.







