BPSC TRE 4 Part Wise Tests: Fix Your Weak Part
š Table of Contents
- BPSC TRE 4 Part Wise Test: Key Facts
- What This Page Covers
- What Is a Sectional Test?
- The Parts of the BPSC TRE 4 Paper
- Part 1: Language (30 Questions, Qualifying Only)
- Part 2: General Studies (120 or 40 Questions)
- Part 3: Subject (80 Questions, Class 6 to 12 Only)
- How BPSC TRE 4 Part Wise Tests Find Your Weak Part
- Why Part 3, Your Subject, Is the Key Part
- Part-Wise Marks Strategy for BPSC TRE 4
- How Much Time to Give Each Part
- How to Raise a Weak Part, Step by Step
- Sectional Tests vs Chapter Tests vs Full Tests
- How Mock Test Center Part Wise Tests Work
- A Simple Weekly Plan With Sectional Tests
- Common Mistakes in Sectional Test Practice
- Final Words
Quick Answer: BPSC TRE 4 Part Wise Tests (also called sectional tests) are practice tests that cover only one part of the TRE 4 paper at a time, like the Language part, the General Studies part or your Subject part. They show you which part is weak, how many marks you lose in it, and how to fix that part step by step before the real exam.
BPSC TRE 4 Part Wise Test: Key Facts
A sectional test is a small practice test made from only one part of the full paper. The BPSC TRE 4 paper is not one plain paper. It is made of clear parts. Part 1 is Language. Part 2 is General Studies. For Class 6 to 12, Part 3 is your Subject. A sectional test picks just one of these parts and tests you on it alone.
All the facts in this page come from the final notice of this exam, Advertisement No. 15/2026 of the Bihar Public Service Commission (BPSC). The exam fills 33,320 school teacher posts for Class 1 to 12 in Bihar. The written exam date is not announced yet. So, your best work right now is smart practice, part by part.
| Fact | Detail |
|---|---|
| Exam Name | BPSC TRE 4.0 Teacher Recruitment Examination 2026 |
| Exam Body | Bihar Public Service Commission (BPSC) |
| Notice | Advertisement No. 15/2026 |
| Total Posts | 33,320 school teacher posts for Class 1 to 12 |
| What a Sectional Test Is | A practice test with questions from only one part of the paper |
| Questions in Real Exam | 150 questions |
| Marks in Real Exam | 150 marks |
| Time in Real Exam | 2 hours 30 minutes (150 minutes) |
| Part 1 | Language, 30 questions, qualifying only, at least 30% marks needed |
| Part 2 | General Studies, 120 questions for Class 1 to 5; 40 questions for Class 6 to 12 |
| Part 3 | Your Subject, 80 questions, only for Class 6 to 12 |
| Merit Marks | 120 marks (Part 2 alone for Class 1 to 5; Part 2 + Part 3 for other levels) |
| Negative Marking | One-third of a mark cut for each wrong answer |
| Exam Date | Not announced yet by BPSC |
| Official Website | bpsc.bihar.gov.in |
What This Page Covers
- What is a sectional test?
- The parts of the BPSC TRE 4 paper
- How sectional tests find your weak part
- Why Part 3, your subject, is the key part
- Part-wise marks strategy
- How much time to give each part
- How to raise a weak part, step by step
- Sectional tests vs chapter tests vs full tests
- How Mock Test Center sectional tests work
- A simple weekly plan with sectional tests
- Common mistakes in sectional test practice
What Is a Sectional Test?
A sectional test is a practice test that asks questions from only one part of the exam paper. If you give a Part 2 General Studies sectional test, every question in it is from General Studies. If you give a Part 3 sectional test, every question is from your own subject. No other part is mixed in it.
Think of it like a class test in school. A teacher tests one subject at a time, and that test tells you how strong you are in that one subject. A sectional test does the same job for the BPSC TRE 4 paper. It gives you a clear score for one part, without the noise of the other parts.
This matters a lot in TRE 4, because the parts do not play the same role. Part 1 Language is only for qualifying. Its marks do not add to your merit. Part 2 and Part 3 make your merit. So, a full test score alone can fool you. Your Part 3 subject may be weak inside a good total. Or your Part 1 may be so weak that you fail to qualify. In a full test, these dangers hide. In a sectional test, they come out in the open at once.
A sectional test also trains one skill at a time. Each part has its own style. Language questions test grammar and word power. General Studies questions test wide facts. Subject questions test deep study of your subject books. When you practice one part alone, your mind learns its style deeply, and you learn where the traps are set.
You do not need to finish the full syllabus before you start sectional tests. The right time to start is when you have read one part once, in a basic way. Read the part, then give its sectional test. The test will show you what you really know and what you only think you know. Then you read the weak topics again and give the test once more. This read, test, fix and test cycle is the fastest way to grow.
The Part Fix Cycle
One round of this cycle makes one part of the paper stronger. When the round ends, start again with the same part or the next one.
Read one part one time
Give the sectional test
See score, accuracy and time
Fix weak topics, then retest
Then repeat the same cycle for every part, again and again, till the exam.
Sectional tests sit in the middle of your practice plan. Chapter tests are smaller than them, and full mock tests are bigger than them. Later on this page, we compare all three in a simple table. For your full paper practice, use the BPSC TRE 4 Mock Test page. For one part at a time, the sectional tests on this page are the right tool.
The Parts of the BPSC TRE 4 Paper
The TRE 4 written test has 150 questions, 150 marks and 2 hours 30 minutes. But the paper is not the same for every level. Your level decides your parts. Class 1 to 5 has two parts. Class 6 to 8, Class 9 to 10 and Class 11 to 12 have three parts. You must know your own paper well, because your sectional test plan is built on these parts.
| Part | Class 1 to 5 (PRT) | Class 6 to 12 (Middle, TGT, PGT) |
|---|---|---|
| Part 1: Language | 30 questions, qualifying only | 30 questions, qualifying only |
| Part 2: General Studies | 120 questions, full merit | 40 questions, merit |
| Part 3: Subject | No subject part | 80 questions, merit |
| Merit Counted From | Part 2 only (120 marks) | Part 2 + Part 3 (120 marks) |
Part 1: Language (30 Questions, Qualifying Only)
Part 1 tests English and one of Hindi, Urdu or Bangla. This part is only for qualifying. You must score at least 30% marks in it, that is 9 marks out of 30. Its marks do not add to your merit. But do not take it lightly. If you score less than 30% here, you are out of the race, even if your other parts are very strong. A sectional test of Part 1 tells you early if your language is safe or in danger.
Part 2: General Studies (120 or 40 Questions)
Part 2 is General Studies. For Class 1 to 5, this is the biggest part of the paper, with 120 questions. Your full merit for Class 1 to 5 comes from this part alone. For Class 6 to 12, Part 2 has 40 questions, and it still adds to your merit. For Class 1 to 5, it covers eight topics: elementary maths, mental ability test, general awareness, general science, social science, the Indian national movement, geography and environment. For Class 6 to 12, it covers five topics only: elementary maths, general awareness, general science, the Indian national movement and geography. Because it is wide, small losses in many topics can pull this part down. Sectional tests of Part 2 show you which topics inside it are weak.
Part 3: Subject (80 Questions, Class 6 to 12 Only)
Part 3 is your own subject ā the one subject in which you passed the teacher eligibility test. It has 80 questions for Class 6 to 8, Class 9 to 10 and Class 11 to 12. Its syllabus is based on SCERT and NCERT books, and its level is as per the minimum qualification fixed for the post. This is the deepest part of the paper. The questions come from your subject books, so only true study of the subject works here. Part 3 is also the biggest merit part for Class 6 to 12, as you will read below.
One rule is the same in every part. Every question has 5 options, A to E. If you do not want to answer a question, you must mark option E. A fully blank question is treated as a wrong attempt. And for every wrong answer, one-third of a mark is cut. Sectional tests train you in this rule part by part, so you do not lose easy marks in the real exam.
Start with one part today. Pick the part you fear the most and give its test on the BPSC TRE 4 Sectional Test Series page. You can also see all BPSC tests at BPSC Mock Tests.
How BPSC TRE 4 Part Wise Tests Find Your Weak Part
A sectional test finds your weak part in a very simple way: it gives you a separate score for each part. When every part has its own score, you can no longer hide. The weak part stands out at once.
After each sectional test, look at three things. First, your score: how many marks did you get in this part? Second, your accuracy: out of the questions you tried, how many were right and how many were wrong? Third, your time: how much time did you take in this part? A part can be weak in three different ways, and each way has a different fix.
- Low score, low accuracy: This means your basic knowledge of the part is weak. You need to go back to the books and read the part again, slowly and with care.
- Good knowledge, low speed: You know the answers but take too long. This is common in Part 2 maths and mental ability questions. The fix is timed practice, not more reading.
- Good score, many guesses: You scored well but guessed a lot. This is risky. With one-third negative marking, the same guesses can fail you in the real exam. The fix is to learn the facts behind the guesses.
- One topic inside the part fails again and again: For example, your Part 3 subject score is fine in most chapters, but one or two chapters always go wrong. The fix is a small, focused study of those chapters, then a fresh test.
Keep a small notebook or a simple chart for your part-wise scores. Write the date, the part name, your score, your accuracy and the time you took. After three or four tests of each part, the chart will speak to you. The part with the lowest score is your weak part. The part where your score is rising is healing well. This chart is your true report card, far more useful than a guess about how your study is going.
Also check Part 1 with full care, even though it is only qualifying. Many candidates never test Part 1 and then fall below 30% in the real exam. One Part 1 sectional test every week keeps this danger away. If your Part 1 score is near 9 marks, it is a red flag. Give language daily time till the score is safely above the line. And read the answer key and the reason for each wrong answer on the same day. Note the topic of every wrong answer in your notebook. Soon you will see a pattern: most of your losses come from a few small topics. Fix those topics and your part score jumps up fast.
Old papers help you check this at the paper level too. The BPSC TRE 4 PYQ Test Series gives you past teacher exam papers as tests. When you sort your PYQ mistakes part by part, you see which parts the real exam asks in a hard way and which parts give easy marks. Mix this with your sectional scores and your weak-part list becomes fully clear.
Why Part 3, Your Subject, Is the Key Part
For Class 6 to 8, Class 9 to 10 and Class 11 to 12, Part 3 is the heart of this exam. Your merit is made of 120 marks: 40 from Part 2 and 80 from Part 3. So, your subject alone carries two out of every three merit marks. No other part can lift you or pull you down like Part 3 can.
Think of it in simple numbers. Two candidates may score the same in Part 2, say 28 out of 40. The one who scores 60 out of 80 in the subject will stand far above the one who scores 45. In a race of 33,320 posts, where lakhs of candidates fight for each level, this gap of a few subject marks decides who gets the job. This is why toppers give their subject the biggest share of study time.
Part 3 is also the part where real study beats guess work. General Studies questions can sometimes be solved by common sense. Subject questions cannot. They come from the subject syllabus, which is based on SCERT and NCERT books, at the level of the minimum qualification fixed for the post. If you have read your subject deeply, you score. If not, no trick can save you. Sectional tests of Part 3 tell you the truth about your subject depth, chapter by chapter.
For Class 1 to 5, there is no Part 3. There, Part 2 General Studies plays the key role, because the full merit of 120 marks comes from it alone. So, PRT candidates must treat Part 2 the way other levels treat Part 3: as the part that decides the job.
The lesson is one for all levels. Find the part that carries your merit, test it again and again, and never let it stay weak. Your sectional test chart will show you if your key part is safe or still in danger.
Part-Wise Marks Strategy for BPSC TRE 4
A marks strategy means you decide, before the exam, how you will earn your marks part by part. You do not leave it to luck. The merit is of 120 marks, and the qualifying marks in the written test are 40% for General, 36.5% for BC, 34% for EBC and 32% for SC, ST, Women and Persons with disability. To be safe in the merit list, you must score well above your qualifying line. Every part must add marks, and no part should eat your marks through wrong guesses.
The first rule of the strategy is to know the weight of each part. For Class 6 to 12, Part 3 is 80 marks and Part 2 is 40 marks of your merit. Give your study time in the same share: about two-third time to your subject and one-third to General Studies, plus a small daily time for Part 1 language safety. For Class 1 to 5, Part 2 is your full merit, so it takes the biggest share, with Part 1 kept safe side by side.
Make a simple target chart like the one below. Write your score from your last three sectional tests as a percent. Then set a target that is a little higher, not sky high. A target you can reach in two to three weeks is the right target.
| Part | Your Last Score (from your tests) | Your Next Target |
|---|---|---|
| Part 1: Language (only qualifying, stay above 30%) | Write your percent here | Safe score, well above 30% |
| Part 2: General Studies | Write your percent here | Last score + 10% |
| Part 3: Subject (Class 6 to 12) | Write your percent here | Last score + 10% |
Example: A Part Score Chart (Class 9 to 10 Teacher Post Candidate)
The bars below show how a part score chart can look. The part with the short red bar is the weak part. Fix that part first.
This chart is an example made for study help only. It is not official BPSC data. Make the same chart with the scores of your own tests.
The second rule is to protect your marks. In each part, first answer the questions you are sure of. Then try the questions where you can cut two wrong options. For the questions where you have no idea at all, mark option E, as the notice says. Do not leave a question fully blank, because a blank question is treated as a wrong attempt. And never make a blind guess: with one-third of a mark cut for each wrong answer, blind guesses eat the marks you earned with hard work.
The third rule is to use your strong part as your bank. If your subject is strong, make it fully strong, so it pays for the hard questions of other parts. But do not stop testing it. Give a sectional test of your strong part once in two weeks, so it stays strong till the exam day.
How Much Time to Give Each Part
In the real exam you get 2 hours 30 minutes, that is 150 minutes, for 150 questions. This means you get one minute for each question. Time is a real test in TRE 4. Many candidates know the answers but leave questions at the end, only because they gave too much time to one part.
A sectional test trains your time sense for one part at a time. When you give a timed Part 3 test, you learn how fast you read a subject question and when to leave a hard question and move on. When you give a timed Part 1 test, you learn to finish language fast and save time for the merit parts. This time sense then adds up in the full paper.
Below is one simple way to split your 150 minutes. This is a study guide, not a rule of BPSC. Change it as per your own speed.
| Part of the Paper | Class 1 to 5 Plan | Class 6 to 12 Plan |
|---|---|---|
| Part 1: Language (30 questions) | 20 minutes | 20 minutes |
| Part 2: General Studies | 110 minutes (120 questions) | 35 minutes (40 questions) |
| Part 3: Subject (80 questions) | No subject part | 80 minutes |
| Marked questions and final check | 20 minutes | 15 minutes |
| Total | 150 minutes | 150 minutes |
Work in two rounds inside each part. In round one, answer all the easy and sure questions and mark the hard ones. In round two, come back to the marked questions with the time you saved. This two-round way is easy to learn in sectional tests: first pass through the part fast, then use the left time on the marked questions of that part.
One more time tip: fix a hard stop for each part. If a part crosses its time in your plan, move on, even if two questions are left. Those two questions can cost you ten easy questions of the next part. Candidates learn this discipline only by giving timed sectional tests again and again. To feel the full paper clock, also give the full mock test once a week.
Practice one part with a real clock. Open the Sectional Test Series, pick a part, and test your speed. For quick daily practice, try the Daily Quizzes on Mock Test Center.
How to Raise a Weak Part, Step by Step
Every candidate has one weak part. This is normal. A weak part is not a life sentence; it is just a part of the paper that has not got the right kind of work yet. Follow these steps and any part can be raised in a few weeks.
How to Fix a Weak Part: The 5 Steps
Give a Part Test
See Score and Accuracy
Find the Weak Topics
Study Those Topics
Retest and Compare
- Find the weak part with a test, not with a feeling: Give one sectional test for each part of your paper. The part with the lowest score and the lowest accuracy is your weak part. Do not go by what you like or dislike. Go by marks.
- Find the weak topics inside the part: Read your test report with care. Note the topics of all your wrong answers. In most cases, two or three topics cause most of the loss. In Part 2, it may be maths and Bihar topics. In Part 3, it may be two chapters of your subject book.
- Go back to the basic book for those topics only: Read the weak topics from your subject book or NCERT book once more, slowly. Make short notes in your own words. Do not read the full part again; your time must go where the loss is.
- Fix the chapters with chapter tests: After reading, test the topic at the smallest level. The Chapter Test Series lets you test one chapter at a time, so you know at once if the topic is now clear.
- Give the sectional test again: After two or three days of fix work, give a fresh sectional test of the same part. Compare the new score with the old one. If the score has risen, your fix is working. If not, change the book or the way you read that part.
- Write the hard facts in a small copy: Grammar rules, maths formulas, subject facts and dates: write the facts you keep missing in a small copy. Read this copy for ten minutes daily. Facts enter the mind by daily touch, not by one long read.
- Revise the part every week: A fixed part falls again if you leave it. Give one short sectional test of your old weak part every week, even after it becomes strong. This keeps it safe till the exam.
- Mix the part into full tests: In the end, the real paper mixes all parts. So, after your part score rises, check it inside full tests too. Your work is done when the part gives you good marks inside a full paper, under full time stress.
Give this cycle about two to three weeks for one weak part. The exam date is not announced yet, so start early and use this time well. The key is order: test, find, read, test again. Candidates who only read and never test keep feeling that a part is weak, but they never fix it in a real way.
If your base itself is weak in a part, start one step lower. Read the NCERT books for that part first and use the NCERT Test Series to check each book. A strong base makes the sectional test much easier. For Part 2, also keep your daily news habit strong with the Current Affairs Test Series, because general awareness grows day by day.
Sectional Tests vs Chapter Tests vs Full Tests
All three types of tests are useful, but each one does a different job. Use the wrong type at the wrong time and your practice loses power. This simple table shows the difference.
| Point | Chapter Test | Sectional Test | Full Test |
|---|---|---|---|
| What it covers | One small chapter or topic | One full part, like Part 2 or Part 3 | The full paper, all parts mixed |
| Main job | Check if one topic is clear | Find and fix a weak part | Build speed, stamina and exam habit |
| Best time to use | Just after reading a chapter | After reading one full part | After most of the syllabus is read |
| What it shows you | Weak topics | Weak parts, part speed and accuracy | Total score and time control |
| Time stress | Low | Medium | High, same as the real exam |
The right order is simple. First, chapter tests fix your topics. Then, sectional tests join those topics into a strong part. In the end, full tests join all parts into one paper and train you for the real day. Skipping the middle step is a common error. Candidates jump from chapters to full tests and then wonder why one part keeps pulling their total down.
You can find all three types in one place: chapter-wise practice on the Chapter Test Series page, part-wise practice on the Sectional Test Series page, and full paper practice on the Mock Test page.
How Mock Test Center Part Wise Tests Work
The sectional tests for this exam are on the BPSC TRE 4 Sectional Test Series page. The tests are made on the real TRE 4 pattern, so your practice feels like the real exam from day one.
The tests are in English and Hindi both, so you can practice in the language you are comfortable with. The questions carry the same rules as the real paper: 5 options, A to E, for every question, and one-third of a mark, shown as 0.33, cut for each wrong answer. You also learn the option E rule in practice: if you do not want to answer, mark option E, and never leave a question fully blank.
Each sectional test covers one part of your paper. Test Part 1 to check if you are safely above the 30% qualifying line. Test Part 2 to find your weak topics inside it. And for Class 6 to 12, test Part 3 to check the depth of your subject study. Give the test in one sitting, without a break, just like the real exam. When you submit, check your score, accuracy and time. Then read the right answer and the reason for every question you got wrong or guessed, note the weak topics in your copy, fix them, and give the next test of the same part after a few days. You can give these tests on your phone or computer, at home or anywhere you study.
If you want all the tests of this exam in one plan, with every series open to you, see the Mock Test Pass page. And to see practice tests for every exam in one place, visit All Mock Tests.
A Simple Weekly Plan With Sectional Tests
A fixed weekly plan turns sectional tests into a habit. Here is one simple plan. Change the days as per your own routine, but keep the order of work the same: read, test, fix, retest.
| Day | What to Do |
|---|---|
| Monday | Read one part; give its sectional test in the evening |
| Tuesday | Check the test report; note weak topics; read them again |
| Wednesday | Give a sectional test of a second part; fix its weak topics |
| Thursday | Part 1 language practice and revision of notes of both parts |
| Friday | Retest the weak part of Monday; compare the score |
| Saturday | One full mock test; sort its mistakes part by part |
| Sunday | Light revision of the small copy of hard facts; rest and plan the next week |
Your Week at a Glance
Read one part and give its test
Test one more part and fix it
Part 1 practice and note revision
Retest the weak part
Give one full paper test
Light revision and next week plan
Keep an eye on the Latest Jobs page, so you see the TRE 4 exam date news the day BPSC announces it. Till then, use this time to make every part strong.
Make every part strong. Start your part-wise practice now on the BPSC TRE 4 Sectional Test Series. Old paper practice is waiting for you on the PYQ Test Series page.
Common Mistakes in Sectional Test Practice
- Ignoring Part 1 because it is only qualifying: Part 1 marks do not add to merit, but a score below 30% ends your race at once. Test Part 1 every week till it is fully safe.
- Giving all time to General Studies and little to the subject: For Class 6 to 12, Part 3 carries 80 of the 120 merit marks. A weak subject cannot be covered by a strong Part 2.
- Not checking the report: A test without report checking is half work. The score alone teaches nothing. Read every wrong answer and its reason on the same day.
- Giving the test without a clock: An untimed sectional test hides your speed problem. Always give the test in fixed time, like the real exam.
- Leaving questions fully blank: In TRE 4, a blank question is treated as a wrong attempt. If you do not want to answer, mark option E. Practice this rule in every sectional test.
- Blind guessing to finish the test: With one-third negative marking, blind guesses cut your score and give you a false report. Guess only when you can cut some wrong options.
- Reading the whole part again after a bad score: This wastes days. Find the weak topics from the report and read only those topics again.
- Never retesting the same part: One test finds the problem. Only a retest proves that the problem is fixed. Always close the loop.
Final Words
The BPSC TRE 4 paper looks like one paper, but it is really two or three small papers joined together, and each part plays a different role. Part 1 must be crossed safely. Part 2 must add steady marks. And for Class 6 to 12, Part 3 must carry your merit. The candidate who makes each part strong, one by one, wins the full paper in the end.
Sectional tests are the tool that shows you the truth about each part: your score, your speed and your weak topics, all in clear numbers. Start today. Give one sectional test, check its report with care, fix the weak topics, and test again. Repeat this for every part, and no part of the paper will scare you on the exam day. For the exam date and other official news, keep checking the official website bpsc.bihar.gov.in and our Latest Jobs updates.
Give your first sectional test now on the BPSC TRE 4 Sectional Test Series page, and build your full paper practice on the BPSC TRE 4 Mock Test page.
This guide is made by Mock Test Center, founded by Shubham Kumar Sah. We make free and easy practice tests for aspirants of Bihar and all of India. Facts in this guide are based on the official BPSC TRE 4 notice, Advertisement No. 15/2026. Always read the official notice before you apply.







